Nhot Total Quartz 9000 SM 5W30
Version April, 2006
This lubricant, when used according to our recommendations and for the purpose for which is intended,
presents no particular hazards.
A safety data sheet complying with current EC legislation can be obtained from your local commercial adviser.
QUARTZ 9000 SM 5W30
Advanced Fully Synthetic multigrade oil for passenger car engine
Gasoline / diesel engine
• Is an advanced fully synthetic SAE 5W30 high performance engine oil. It combines
outstanding low temperature fluidity and high load protection.
• Recommended for virtually all modern, technically advanced, petrol engines (multivalve
and turbo types, with or without catalytic converter) and all diesel engines,
turbo-charged or naturally aspirated in cars and light vans. Specially suited where
lower viscosity oil is recommended.
• Designed to provide protection under severe driving style or conditions.
• Stability and endurance under extreme conditions (heat, load, speed) that can
cause conventional oils to break down.
Recommended for use
• API SM/CF (API Service Symbol)
• ILSAC GF-4 (Starburst Certification Symbol)
• Ford, GM, PSA, BMW, VW, Audi and Mercedes-Benz
Lengthens engine life
Low temperature flow
Compatibility with a wide
range of seal materials
• Provides excellent start-up performance and engine efficiency, particularly for
vehicles used in city and suburban driving conditions.
• Excellent thermal and oxidation stability.
• Developed to meet the most advanced emissions and fuel efficient requirements.
• An unique combination of advanced synthetic and meticulously selected additives
provide freedom of ring sticking, reduction in deposits leading to a reduced engine
wear and to a longer engine and component life.
• Circulates rapidly within the engine to minimize cold start up wear. Improves low
temperature engine efficiency over conventional mineral oil.
• Ensures the important engine seals stay soft and pliable to minimize oil leakage.
Total Quartz 9000 SM Method Units SAE 5W30
Volumetric mass at 15°C ASTM D1298 kg/m³ 853
Viscosity at 40°C ASTM D445 mm²/s 72.50
Viscosity at 100°C ASTM D445 mm²/s 12.01
Viscosity Index ASTM D2270 – 163
Pour Point ASTM D97 °C -36
Flash Point ASTM D92 °C 227
The typical characteristics mentioned represent mean values.
CÔNG TY TNHH SX TM DV CHÍ TRUNG Chuyên sản xuất, phân phối mỡ bò, dau nhot, dầu nhớt, nhớt, nhot
Địa chỉ: C2 đường 18, KP4, Hiệp Bình Chánh, Thủ Đức, TP.HCM
Hotline: 0908 11 76 76 – 0973 11 76 76 Fax: (08) 37 267 802